|
Frequently Asked Questions
About Color Magic™ Stains
Q:
What is the
best way to apply the UV Sealant?
A:
The best way to apply the UV Sealant is by spraying it
on from the 8 ounce spray can. However, if you
have the 1/2 ounce UV Sealant with the brush, allow the
Color Magic to dry to touch or overnight and load the
brush with the UV Sealant and float it on to the painted
surface.
Q: How do you
clean glass after it is painted?
A:
To
clean a completed project, use a mild vinegar and water
solution. Do not use an ammonia-based cleaner such as
window cleaner. Do not put painted glass in a dishwasher.
Q: Can Color
Magic™ be used in an airbrush on hand blown glass
art?
A:
The
transparent and opaque stains can be successfully airbrushed
on surfaces such as sandblasted glass, mirror, metal,
etched metal, wood facades. Create smoothly graded backgrounds,
interesting textures, shade defined areas, or hard-edged
lines.
Q: What is the
drying time for Color Magic™ stains?
A:
Although
the stains appear to be dry to the touch within 5 to
10 minutes, let them dry to a hard finish overnight.
You can speed up the drying process of the color stains
and the UV sealant by blowing warm air from a hair dryer
on the newly applied sealant or color; or place in a
warm (200Ã) oven for 45 minutes.
Q: What is the
shelf life of Color Magic™ stains?
A:
When stored tightly capped and in a cool, dry place,
Color Magic™ stains have an indefinite shelf life,
except for the glitters and metallics.
Q:
Can you mix Color Magic™ and UV Sealant together?
A:
No, they need to go on seperately.
Q:
Can you put Color Magic™ on dishes?
A:
Only if the dishes are for decoration. Don't eat off
of them. Color Magic™ is not dishwasher safe.
Q:
When blending colors, how can I keep Color Magic™
from drying so quickly?
A:
Working in a cool and damp area will slow the drying
process.
Frequently Asked Questions
About our Outlining Pen
Q: How is the
pen filled?
A:
Simply
fill the reservoir (located above the point) with stain
using an eyedropper or the brush from your Color Magic
bottle.
Q:
How do you clean the pen after using a non-water
based paint?
A:
For non water-base paints, pour alcohol or thinner into
the reservoir immediately after use. Clean tip with
wire plunger that comes with the pen by inserting it
into the reservoir and pushing it through
the point. Use a cotton swab if necessary to force cleaner
fluid through the point. For fire-on enamels, clean
with water. Use plunger to make sure hole is clear.
MAGIC
METAL PLATE
Q:
How do I preserve the longevity of the
metal plate?
A:
When using the Magic Metal Plate for the first time,
apply a small amount of non-stick cooking spray on the
metal plate, only once, before using.
MAGIC
SOLDER POT
Q:
What precautions do I need to use the
Magic Solder Pot?
A:
Put
the Magic Solder Pot on a heat resistant surface and
use heat resistant gloves.
UV
SEALANT
Q:
Is the spray clear when it dries?
A:
Yes it is.
|
